Digital mockup; photos of the finished piece are coming.

From the Cars page

Heel and Toe Button-Up · Blueprint · Smaller print

Heel and Toe Button-Up · Blueprint · Smaller print

Four ways to match speeds between the engine and the road.

Print scale
Large printrepeats every 18 innot in BlueprintSmaller printrepeats every 12 in
Style
Colorway · Blueprint blue
Blueprint blueMachine green
Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Cars

The story in the print

Heel-and-toe is matching engine speed to road speed with both feet; here are four machines that do it for you, or cannot. A dry clutch matches the speeds by slipping, and pays in heat exactly the kinetic energy it delivers: on two faces it carries T = μF(ro + ri), 300 N·m for 5 kN of clamp at μ = 0.3 on facings from 80 to 120 mm radius. The synchronizer does it with a brass cone: friction on a cone of half-angle 6.5 degrees is 8.8 times a flat face’s, and its chamfered teeth block the sleeve until the speeds agree.

A Cardan joint turns a corner but not at a steady speed: at 30 degrees its output runs between 0.866 and 1.155 times the input, twice a turn. The ball-type constant-velocity joint of 1928 carries the torque on six balls whose cage keeps every ball on the plane that bisects the two shafts, so both turn at exactly the same speed. Driveline engineers, and everyone who learned on a stick shift, will know the name.

On the shirt:

  • The Dry Clutch: A clutch driven disc: two woven friction facings and six coil springs around a splined hub.
  • Synchromesh: A brass blocker ring with roof-chamfered teeth, three notches and a finely grooved inner cone.
  • The Cardan Joint: A polished steel Cardan joint, a cross in two yokes, its shafts meeting at 30 degrees.
  • The Constant-Velocity Joint: A sectioned ball joint: four of its six balls in one straight line on the bisecting plane.

This button-up carries HEEL AND TOE in the blueprint style, printed edge to edge at the smaller print scale. It is made for people who have tuned, timed and wrenched for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves.


Every image, explained More on the Cars page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details