Digital mockup; photos of the finished piece are coming.

From the Mechanical Engineering page

Hunting Tooth Button-Up · Blueprint · Smaller print

Hunting Tooth Button-Up · Blueprint · Smaller print

Gears and a bearing, counted tooth by tooth and ball by ball.

Print scale
Large printrepeats every 18 inSmaller printrepeats every 12 in
Style
Colorway · Blueprint blue
Blueprint blue
Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Mechanical Engineering

The story in the print

Where they can, gear designers choose tooth counts with no common factor, so that each tooth meets every tooth of its partner before it meets the same one again, and wear spreads evenly. That is a hunting tooth. The involute pair here is one: 18 and 29 teeth at a 20° pressure angle, cut to the curve Euler proposed in the 1750s, which won because it keeps the speed ratio constant whatever the center distance. Every contact lies on one line tangent to both base circles, and a contact ratio of 1.588 means two pairs share the load 59% of the time. A car’s final drive is another: 41 and 11 share no factor, so the classic 3.73 : 1 wears in evenly.

The differential lets the outer wheel turn faster than the inner in a corner, 1.162 times as fast on a 10 m turn with a 1.5 m track, while its carrier runs at their average. Elsewhere the counts decide what can be built at all. In a planetary set the ring must equal the sun plus two planets, 18 + 54 = 72, and three planets space evenly only because 18 + 72 divides by three; four would not. Musser’s strain-wave gear, patented in 1959, works by giving its flexspline two teeth fewer than its ring, 15 : 1 here. And Conrad’s 1903 way of filling a deep-groove bearing leaves room in a 6205 size for nine balls, and not ten.

The five images:

  • Strain Wave Gearing: A sectioned strain-wave gear: an oval flexspline of 30 teeth meeting the 32-tooth ring at top and bottom only, on a ring of balls.
  • The Planetary Gear Set: Sun 18, three planets of 27 at 120°, ring 72: a triangular carrier, and every tooth the same size.
  • The Deep-Groove Ball Bearing: A deep-groove bearing mid-assembly: the inner ring pushed hard to one side, nine touching balls in the crescent, no room for a tenth.
  • Involute Gear Teeth: Spur gears of 18 and 29 teeth and a gold thread tangent to both base circles: the line of action, both contacts on it.
  • The Differential: A cutaway open differential: a 41-tooth ring, an 11-tooth pinion, and four bevel gears meshing in a square inside the carrier.

This button-up carries HUNTING TOOTH at the smaller print scale. Each image is explained above. It is made for people who have drawn free-body diagrams, sized bearings and chased tolerances for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Mechanical Engineering page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details