Digital mockup; photos of the finished piece are coming.

From the Mechanical Engineering page

Infinite Life Button-Up · Steel · Smaller print

Infinite Life Button-Up · Steel · Smaller print

What steel does before it breaks, and the one stress below which it never will.

Print scale
Large printrepeats every 18 inSmaller printrepeats every 12 in
Style
Colorway · Steel

Large print only: Midnight.

Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Mechanical Engineering

The story in the print

Railway axles broke in the 1840s at loads well below their strength, and August Wöhler spent the following decades finding out why: a stress repeated millions of times cracks steel that would carry it indefinitely if applied once. His S–N curve levels off near a million cycles at the endurance limit, about half the tensile strength, and below it a steel part has infinite life. Above it a crack grows a little with every cycle, and each pause leaves a beach mark around the origin. The tensile test is where the education starts. Mild steel yields with a jolt as a Lüders band sweeps the bar, then strain-hardens until, exactly where Considère’s 1885 condition says, the bar begins to neck.

Mohr published his circle in 1882, and the thin pressure vessel is its classic trap. Hoop stress is pr/t and axial pr/2t, so the circle drawn in the plane of the wall gives a peak shear of pr/4t; but the radial stress is nearly zero, and the big circle through it gives pr/2t, twice as much. Tresca in 1864 and von Mises in 1913 turned one tensile test into a rule for combined loads: a hexagonal prism and a cylinder in principal-stress space, never more than 15.5% apart. And Charpy’s pendulum of 1901 measures toughness by how high it fails to swing, a test that earned its place after the brittle fractures of the wartime Liberty ships.

The five images:

  • Fatigue and the Endurance Limit: A broken round bar, face on: nine beach marks curving around one origin, and a rough, bright final zone along the opposite edge.
  • The Stress–Strain Curve of Mild Steel: Five flat steel bars, each stopped at a landmark: untested, crossed by a slanting Lüders band, evenly stretched, necked, broken on a slant.
  • Von Mises and Tresca: A clear glass cylinder with an amber hexagonal prism inscribed, on brass axes, the shared axis equally inclined to all three.
  • The Charpy Impact Test: A scale Charpy pendulum by long exposure: the light trail higher on the release side, the notch facing away from the striker.
  • Mohr’s Circle: Three brass hoops on one rod, two small ones exactly equal inside a large one, blue enamel where every plane’s stress can lie.

This button-up carries INFINITE LIFE at the smaller print scale. Each image is explained above. It is made for people who have drawn free-body diagrams, sized bearings and chased tolerances for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Mechanical Engineering page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details