Digital mockup; photos of the finished piece are coming.

From the Rocket Science page

Mainstage Button-Up · Engraving · Smaller print

Mainstage Button-Up · Engraving · Smaller print

The machinery that feeds the flame, and the price it charges.

Print scale
Large printrepeats every 18 innot in EngravingSmaller printrepeats every 12 in
Style
Colorway

One colorway: ink on cream.

Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Rocket Science

The story in the print

In an engine test, mainstage is the stretch after the start transient, pumps at speed and engine at full thrust, and these five are the machinery running then. A pump-fed engine must drive its own pumps, and where the turbine gets its gas defines the cycle. A gas generator burns a little propellant and throws it away, 1.8% of the flow at 10 MPa by the power balance behind this design, and betrays itself with a second, smaller plume. Staged combustion sends every gram through the main chamber and pays in pressure instead: to feed a chamber at 20.6 MPa, its hydrogen pump must deliver 46.3. The Space Shuttle Main Engine flew the hydrogen version from 1981.

Hydrogen is the hard part. Pump engineers measure pressure rise as head, the height of liquid the pump could hold up, and hydrogen is so light that 46 MPa is 66 km of head, higher than the top of the stratosphere. One impeller makes about 20 km, so hydrogen pumps are multistage machines turning at tens of thousands of rpm. The same hydrogen cools the chamber wall on its way to the injector, and D. R. Bartz’s 1957 correlation says where it is needed most: just before the throat, where chambers burn through. The bell then decides the thrust. The best expansion ends where the exhaust leaves at the pressure outside: an area ratio of 9 for a chamber at 70 times ambient, 72 at a thousand.

The five images:

  • The Staged-Combustion Engine: A museum cutaway: preburner, turbine and two pumps on one shaft, the hot gas ducted into the main injector, nothing dumped overboard.
  • Regenerative Cooling and the Throat: A small thruster glowing in vacuum, hottest in a white-yellow band at the throat, the bell cooling to dull red at the lip.
  • Pumping Hydrogen: A hydrogen turbopump cut open: an inducer, three identical impellers in series and a turbine disk, all on one shaft.
  • Engine Cycles: Two hydrogen engines firing at night: the gas generator gives itself away with a second, smoky plume; staged combustion has one.
  • Thrust Coefficient and Expansion: Two bells on identical throats: a stubby sea-level nozzle expanded 9 to 1 beside a vacuum bell expanded 72 to 1.

This button-up carries MAINSTAGE at the smaller print scale. Each image is explained above. It is made for people who have sized nozzles, closed power balances and read hot-fire data for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Rocket Science page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details