Digital mockup; photos of the finished piece are coming.

From the Mechanical Engineering page

No Slip Button-Up · Bone · Smaller print

No Slip Button-Up · Bone · Smaller print

Fluid sticks to every surface it touches, and wakes, drag, turbines and bearings follow.

Print scale
Large printrepeats every 18 innot in BoneSmaller printrepeats every 12 in
Style
Colorway · Bone

Large print only: Steel.

Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Mechanical Engineering

The story in the print

A fluid touching a wall moves with the wall. It sounds like a footnote, and it is where boundary layers, skin friction and lubrication come from. Behind a cylinder it rolls the wake into vortices shed from alternate sides, at a frequency Strouhal measured in 1878: fD/U stays near 0.2 over a vast range of Reynolds numbers, so a 3 mm wire in a 10 m/s wind sings at 667 Hz. Von Kármán showed in 1911 that the staggered street is stable only with its rows 0.281 of the vortex spacing apart. Around a sphere the boundary layer decides the drag: near a Reynolds number of 3.5 × 10⁵ it turns turbulent, clings farther around the back, and the drag coefficient falls from about 0.47 to about 0.1.

Nikola Tesla’s bladeless turbine of 1913 runs on viscous drag alone: gas spirals inwards between flat disks and drags them around, so the gaps must be comparable with the boundary layer, whose scale for air at 10,000 rpm is 0.12 mm. In 1883 Beauchamp Tower found an oiled railway bearing pushing the plug out of an oil hole, and Osborne Reynolds explained it in 1886: the turning shaft drags oil into the narrowing gap and floats on it, settling off to one side rather than straight under the load. And Lester Pelton’s split bucket of 1880 turns a jet almost straight back; running at half the jet’s speed, it leaves the water nearly at rest, for an ideal efficiency of 98.3%.

The five images:

  • The Pelton Wheel: A bronze Pelton runner of twenty split buckets, one jet striking at the bottom, the water leaving sideways in two sheets.
  • The Tesla Turbine: A cutaway Tesla rotor: a stack of flat disks with narrow gaps, six exhaust holes by the shaft, flow traces spiraling in from one nozzle.
  • The Journal Bearing: End-on through glass: a steel shaft in a glowing oil film, thickest at upper left, thinnest about 45° around from the bottom.
  • The Kármán Vortex Street: A soap-film street in interference colors: vortices alternating top and bottom behind a small dark disk, the rows spinning opposite ways.
  • The Drag Crisis: Two spheres in smoke: the plain one trailing a wake wider than itself, the one with a trip-wire ring a much narrower wake.

This button-up carries NO SLIP at the smaller print scale. Each image is explained above. It is made for people who have drawn free-body diagrams, sized bearings and chased tolerances for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Mechanical Engineering page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details