Digital mockup; photos of the finished piece are coming.

From the Civil Engineering page

Refusal Button-Up · Blueprint · Red oxide

Refusal Button-Up · Blueprint · Red oxide

Everything rests on the ground, and the ground gets a vote.

Print scale
Large printrepeats every 18 inSmaller printrepeats every 12 in
Style
Colorway · Red oxide
Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Civil Engineering

The story in the print

The ground under a structure is the one material its engineer cannot choose, so geotechnical engineers learn its opinions in the laboratory. Albert Atterberg defined in 1911 the water contents at which a clay turns from brittle to plastic to liquid, and Arthur Casagrande made the liquid limit a machine: the water content at which 25 blows of a brass cup, dropped 10 mm twice a second, close a groove along 13 mm. Coulomb proposed in 1773 that soil fails when shear on a plane reaches cohesion plus friction, and Mohr’s circle later showed which plane goes first. In the triaxial cell a sand with a 30° friction angle fails at three times the cell pressure, along a plane 60° from the horizontal.

Boussinesq solved the stress under a point load in 1885, and summed under a footing it gives the pressure bulbs of every foundation textbook: under a square footing the stress falls to a tenth of the footing pressure about two widths down, the rule of thumb for how deep a site investigation must reach. Water gets a vote too. Flow under a sheet-pile wall obeys Laplace’s equation, and a flow net of curvilinear squares gives the leakage by counting channels and drops; where the water rises into the dig, a gradient near 1 makes the floor boil. And Pisa’s bell tower began leaning while it was being built, on soft clay. Between 1999 and 2001 soil drawn from beneath its high side eased it back about half a degree.

The five images:

  • Mohr–Coulomb and the Triaxial Test: A triaxial cell after failure: a soil cylinder in its rubber membrane, sheared along one flat plane at 60° to the horizontal.
  • The Leaning Tower of Pisa: A white marble model of eight stories, leaning about 4°, its upper stories built a little less tilted, so it faintly curves.
  • The Pressure Bulb: Six glowing bulbs laser-engraved in crystal under a steel footing: stress at 90% of the footing pressure down to 10%, two widths deep.
  • The Liquid Limit: The Casagrande cup on its rubber base, a grooved clay pat closed along a short middle stretch after 25 blows.
  • Seepage into a Cofferdam: A glass-fronted cofferdam in section: gold flow lines under the piles, blue head lines across them, four channels and ten drops a side.

This button-up carries REFUSAL at full scale. Each image is explained above. It is made for people who have hunted zero-force members, broken cylinders and logged boreholes for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Civil Engineering page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details