Digital mockup; photos of the finished piece are coming.

From the Mechanical Engineering page

Top Dead Center Button-Up · Blueprint · Smaller print

Top Dead Center Button-Up · Blueprint · Smaller print

Heat into work, four ways, and the share the second law lets you keep.

Print scale
Large printrepeats every 18 innot in BlueprintSmaller printrepeats every 12 in
Style
Colorway · Blueprint blue
Blueprint blue
Regular price $65
Regular price $65 Sale price $58.50
Opening 10% Sold out
Shipping calculated at checkout.

Free U.S. shipping on every shirt.

Grand opening: the 10% is already taken off the price shown. Through 30 November.

Size
Quantity
  • The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
  • Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
  • Order by 30 November for the best chance of delivery before Christmas.
  • We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
  • Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.

Military or student? Through 30 November, your 10% is already in the price.

Also from Mechanical Engineering

The story in the print

Robert Stirling, a Scottish minister, patented his hot-air engine in 1816. A displacer shuttles a fixed charge of air between a hot space and a cold one while a power piston takes work from the pressure swing, and with a perfect regenerator the ideal cycle reaches the Carnot efficiency, one of the few that can. The desk engines that run on a cup of coffee make the limit tangible: at 85 °C in a 20 °C room no engine can beat 18.1%. Rudolf Diesel did away with the spark in the 1890s. Squeeze air twenty to one too fast for heat to escape and it goes from 293 K to 972 K, hot enough to light fuel, or the tinder in a fire piston.

With a 2 : 1 cut-off the ideal Diesel cycle returns less than an Otto cycle at the same ratio, 64.7% against 69.8% at twenty to one, but a diesel can run at ratios that would make a gasoline engine knock. Felix Wankel’s engine, first run in 1957, runs the Otto cycle in three chambers at once, its rotor turning at a third of the shaft’s speed through a 3 : 2 gear so that all three tips follow the housing. The first pressure–volume diagrams were drawn by engines themselves, on the indicator Watt’s assistant John Southern built in 1796. And boilers and reactor fuel rods are designed around Nukiyama’s 1934 discovery: past the critical heat flux, 1.26 MW/m² for water at one atmosphere, the surface blankets itself in vapor.

The five images:

  • The Stirling Engine: A low-temperature Stirling engine on a cup of coffee: a wide, flat displacer, a small piston, cranks 90° apart, a big spoked flywheel.
  • The Diesel Cycle: A glass fire piston at the moment of ignition: the brass plunger nearly home, one ember glowing at its tip.
  • The Indicator Diagram: A brass steam-engine indicator and its penciled card: flat admission, falling expansion curve, the atmospheric line ruled below.
  • The Wankel Engine: A face-on cutaway: triangular rotor in a two-lobed bore, all three apex seals on the wall, its gear meshing 3 : 2.
  • The Boiling Curve: Film boiling on a platinum wire: the wire glowing orange inside a smooth vapor sheath, big bubbles leaving at regular intervals.

This button-up carries TOP DEAD CENTER at the smaller print scale. Each image is explained above. It is made for people who have drawn free-body diagrams, sized bearings and chased tolerances for a living or for a grade, and for anyone who likes to know what they are wearing.

Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves. Printed and sewn to order.


Every image, explained More on the Mechanical Engineering page
Fabric, care and how it’s made
  • Fabric: 88% polyester, 12% spandex
  • Fabric weight: 3.83 oz/yd² (130 g/m²)
  • Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
  • Made for adults.
  • Made in USA of imported fabric.
  • How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
View full details