Flat lay 1 / 4
Digital mockup; photos of the finished piece are coming.
Heel and Toe Button-Up · Bone · Smaller print
Heel and Toe Button-Up · Bone · Smaller print
Four ways to match speeds between the engine and the road.
Free U.S. shipping on every shirt.
Grand opening: the 10% is already taken off the price shown. Through 30 November.
| Inches | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Chest, flat | 20 | 21 | 22 | 23 | 24½ | 26¾ | 29 | 31¼ |
| Front length | 28½ | 29 | 29½ | 30 | 30¾ | 32 | 33 | 34 |
| Shoulder | 17¾ | 18¼ | 18¾ | 19¼ | 20 | 21⅛ | 22¼ | 23⅜ |
| Sleeve length | 8¼ | 8½ | 8¾ | 9 | 9¼ | 9⅝ | 10 | 10⅜ |
| cm | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Chest, flat | 50.8 | 53.3 | 55.9 | 58.4 | 62.2 | 67.9 | 73.7 | 79.4 |
| Front length | 72.4 | 73.7 | 74.9 | 76.2 | 78.1 | 81.3 | 83.8 | 86.4 |
| Shoulder | 45.1 | 46.4 | 47.6 | 48.9 | 50.8 | 53.7 | 56.5 | 59.4 |
| Sleeve length | 21.0 | 21.6 | 22.2 | 22.9 | 23.5 | 24.4 | 25.4 | 26.4 |
Measured with the shirt laid flat; chest is taken 1 in below the armhole, so double it for the full chest. The easiest check: lay a shirt that fits you flat and compare. Each shirt is cut and sewn by hand, so sizes can vary by up to 1 in. Stretch fabric (12% spandex).
Buying for someone? Compare a shirt they wear with this chart, or choose socks or a tie, which are one size. Or give a gift card and let them choose.
Still unsure? Ask us.
Couldn't load pickup availability
- The shirt: short-sleeve button-up with a spread collar, in a light stretch fabric (88% polyester, 12% spandex). The print is part of the cloth, so it won’t crack or peel. Machine wash cold, inside out; hang to dry; iron low.
- Every image on it, explained: What’s on it ↓
- Made to order: printed and sewn in about 5–9 business days, then usually 3–7 business days to arrive in the U.S.
- Order by 30 November for the best chance of delivery before Christmas.
- Ordered now, it may arrive after Christmas. A gift card arrives by email straight away.
- We opened our doors on 5 Oct 2026, so no reviews yet. Our promise: if it arrives damaged or misprinted, tell us within 30 days of delivery and we’ll replace it or refund you, free.
- Each one is made for you, so sizes can’t be exchanged. Not sure which to pick? Send us the measurements of a shirt that fits and we’ll tell you.
- Shipping ·Returns and replacements·Fit and sizing·How a design is made
Military or student? Through 30 November, your 10% is already in the price. Military or student? 10% off with ID.me.
Also from Cars
-
The tieTorque of the Town Medallion Tie · Engine-Room Red
Regular price $36Sale price $32.40 -
The socksThe Golden Gearbox Socks · Concept Medallions · Pit Lane Green
Regular price $26Sale price $23.40
The story in the print
Heel-and-toe is matching engine speed to road speed with both feet; here are four machines that do it for you, or cannot. A dry clutch matches the speeds by slipping, and pays in heat exactly the kinetic energy it delivers: on two faces it carries T = μF(ro + ri), 300 N·m for 5 kN of clamp at μ = 0.3 on facings from 80 to 120 mm radius. The synchronizer does it with a brass cone: friction on a cone of half-angle 6.5 degrees is 8.8 times a flat face’s, and its chamfered teeth block the sleeve until the speeds agree.
A Cardan joint turns a corner but not at a steady speed: at 30 degrees its output runs between 0.866 and 1.155 times the input, twice a turn. The ball-type constant-velocity joint of 1928 carries the torque on six balls whose cage keeps every ball on the plane that bisects the two shafts, so both turn at exactly the same speed. Driveline engineers, and everyone who learned on a stick shift, will know the name.
On the shirt:
- The Dry Clutch: A clutch driven disc: two woven friction facings and six coil springs around a splined hub.
- Synchromesh: A brass blocker ring with roof-chamfered teeth, three notches and a finely grooved inner cone.
- The Cardan Joint: A polished steel Cardan joint, a cross in two yokes, its shafts meeting at 30 degrees.
- The Constant-Velocity Joint: A sectioned ball joint: four of its six balls in one straight line on the bisecting plane.
This button-up carries HEEL AND TOE in Bone, printed edge to edge at the smaller print scale. It is made for people who have tuned, timed and wrenched for a living or for a grade, and for anyone who likes to know what they are wearing.
Details: 88% polyester, 12% spandex stretch fabric, spread collar, short sleeves.
Fabric, care and how it’s made
- Fabric: 88% polyester, 12% spandex
- Fabric weight: 3.83 oz/yd² (130 g/m²)
- Care: machine wash cold, inside out. Do not bleach. Hang to dry. Iron on low.
- Made for adults.
- Made in USA of imported fabric.
- How it’s made: I design every template and check every figure; AI image tools help render the illustrations.
What’s on it The equations, ideas and images on this design, and what they mean
Share
More from Cars
-
Wide Open Throttle Button-Up · Dusk
Regular price $65Regular price$65Sale price $58.50
